Product Description

Stainless steel wedge wire mesh tubes adopt a V-shaped wire fully welded structure, with gaps expanding outward. This design allows particles to form a filter cake that is easy to rinse, solving the problems of easy clogging and difficult cleaning of traditional filter tubes. The fully welded seam skeleton provides strong pressure resistance, and the high open area results in a large filtration area with low energy consumption. The stainless steel wedge wire mesh tubes use 304/316L stainless steel, which is corrosion-resistant. Tube diameter and gap size can be customized to adapt to various solid-liquid separation systems.

Product Advantages

1.. High opening rate and low pressure loss: The stainless steel wedge wire mesh tube has an opening rate exceeding 30%, with high filtration flux and low energy consumption.

2.. High strength and excellent stability: The weld joint is continuous and robust, resistant to high pressure, vibration, and backwash, with minimal risk of deformation or damage.

Technical Parameters

Parameter Category	Optional Range/Specification
Common materials	304, 304 L, 316, 316 L, 321, 904 L, Duplex Steel 2205/2507, Hastelloy Alloy, Titanium Materials, etc.
Outer diameter of the tube	25 mm ~ 1500 mm
Standard length	1000 mm, 1500 mm, 2000 mm, 3000 mm, with a maximum length of 6000 mm
Filter gap	0.015 mm, 0.02 mm, 0.05 mm, 0.1 mm, 0.2 mm, 0.3 mm, 0.5 mm, 1.0 mm, 2.0 mm, 3.0 mm, 5.0 mm, 6.0 mm, etc.
Types of support rods	Circular support rod, V-shaped support rod, flat steel support rod
Maximum working pressure	Typically ranges from 1.0 MPa to 2.5 MPa

FAQ

1. Q:What is the difference between 304 and 316L materials?

A:The main consideration is the corrosiveness of the fluid. 304 is suitable for general fresh water and most chemical products; if the fluid in the stainless steel wedge wire tube contains chloride ions or has stronger corrosiveness, it is recommended to choose the more corrosion-resistant 316L.

2.Q:Why can the V-shaped groove prevent clogging? How to clean it?

A:The V-shaped structure is narrow inside and wide outside, making it difficult for particles to form a bridge at the inlet and thus less prone to deep clogging. Backwashing can easily remove the surface filter cake.